Funbox vs Aoseed X-MAKER JOY: Which Is Better for You?

Funbox vs Aoseed is the comparison more and more parents land on when shopping for a first 3D printer for their kids. Both the ugee Funbox and the AOSEED X-MAKER JOY are fully enclosed, app controlled, PLA only machines built around the same promise: safe, simple printing that a child can run without an engineering degree. If you have been searching for Aoseed vs Funbox and getting vague answers, this guide lays out the verified facts from both official product pages so you can decide with confidence.

Funbox vs Aoseed X-MAKER JOY at a Glance

Here is the side by side view, pulled from the official spec sheets on ugee.com and aoseed.com.

Price and What Comes in the Box

Prices checked on September 7, 2026, on the official stores: the ugee Funbox sells for $299 (regular price $329), and the AOSEED X-MAKER JOY Starter Pack sells for $269 (regular price $339). AOSEED also offers a Growth Pack at $285 that adds four spools of filament.

Both boxes include the printer, a starter PLA spool, a magnetic build plate, the tools you need, and DIY stickers, so neither requires extra purchases to print on day one. The Funbox package adds a filament holder, calibration card, cleaning needle, and pliers. On pure sticker price, the X-MAKER JOY is $30 cheaper. For a wider view of what kids printers cost across the market, see our guide on how much a 3D printer for kids costs.

Safety: Enclosure, Air Filtration, and Certifications

Safety is where the Funbox vs Aoseed comparison gets interesting, because both brands take it seriously and document it differently.

The Funbox wraps the print area in a fully enclosed, rounded chassis with anti-scald and anti-pinch protection, a cool-touch magnetic bed, a magnetic door, and a 12V low-voltage power design. Its standout feature is air quality: a built-in fan pushes air through dual-layer H12 HEPA and activated carbon filters, capturing up to 99.5% of particles as small as 0.1 to 0.3 microns. The system is UL GREENGUARD certified for indoor emissions, and the printer meets ASTM F963-23 and EN71 toy safety standards.

The X-MAKER JOY is also fully enclosed and uses a low-temperature nozzle with no heated bed, which removes two common burn risks. AOSEED describes child-friendly details throughout the design, but the company does not advertise an air filtration system or an emissions certification on its product pages.

Both machines are enclosed and kid focused. If the printer will live in a bedroom or a shared family space, the Funbox's certified filtration gives it a measurable edge. We dig deeper into this topic in is a 3D printer safe for kids.

Ease of Use: Setup, Leveling, and Apps

Neither printer asks a child to touch a wrench. The Funbox is leveling-free and goes from unboxing to first print in minutes, with step-by-step visual guidance built into the flow. Kids browse models and start prints with one tap in the ugee UFun App on a phone or tablet. When they outgrow tap-to-print, U-PRINT for Windows opens up real slicing controls, so the same machine grows with them.

The X-MAKER JOY arrives fully assembled with auto leveling and one-tap printing through the AOSEED App. Its app-guided approach keeps every step inside a single, simple interface, which suits younger children well. There is no desktop slicer in the AOSEED ecosystem for the JOY, so advanced tweaking is limited to what the app exposes.

For a first printer, both are genuinely easy. The difference shows up a year in: the Funbox offers a path to more control, while the JOY keeps things app simple.

Creative Tools: AI Features and Model Libraries

This is the feature set kids actually feel, and both brands invest heavily here.

AOSEED ships the JOY with a library of over 8,000 parent-approved models, 15+ in-app design games, 16 mini design modules, creator course access, and AI tools like AI Doodle and AI MiniMe that turn drawings and photos into printable designs. It is a deep, ready-made content ecosystem.

The Funbox takes a generation-first approach. Its AI creative modeling lets kids create printable models from their voice, a few words, a simple doodle, or a photo, and the UFun App library adds new models every week. Step-by-step videos and creative challenges fold STEM learning into the making process.

AOSEED wins on the size of its ready-to-print catalog. Funbox wins on how flexibly kids can turn their own ideas into models and on a library that keeps refreshing weekly.

Print Speed, Quality, and Hardware

On paper the core hardware is close: both print PLA on a 120 x 120 x 120 mm build volume with 0.05 mm minimum layer thickness, connect over Wi-Fi, skip the heated bed, and include a built-in camera.

The Funbox pulls ahead on speed and reliability features. It is rated up to 500 mm/s, compared with 300 mm/s for the X-MAKER JOY, and it adds power-off resume printing, filament tangle detection, a tool-free quick-release nozzle, a 2MP camera with time-lapse recording, and a lab-tested noise level around 46 dB. The JOY counters with a compact footprint and a camera for monitoring prints through the app.

One honest caveat: advertised maximum speeds are best-case numbers on any consumer printer, and everyday prints run slower on both machines. In practice, both produce clean, detailed PLA models that look great on a shelf.

Funbox vs Aoseed: Which One Should You Choose?

There is no wrong answer here, but there is a right answer for your family.

Choose the ugee Funbox if:

• Air quality matters and you want certified HEPA + carbon filtration in a bedroom or classroom.
• You value the fastest print speeds and extras like power-off resume, tangle detection, and time-lapse video.
• You want a printer your child can grow with, from one-tap app printing up to real desktop slicing in U-PRINT.
• Toy-grade safety certifications (UL GREENGUARD, ASTM F963-23, EN71) are on your checklist.

Choose the AOSEED X-MAKER JOY if:

• Budget is the deciding factor and the $30 lower price helps.
• You want the largest ready-to-print model library and in-app design games out of the box.
• Your child is in the 4 to 12 range and you prefer an experience that stays entirely inside one simple app.

Still weighing options? Our best 3D printer for kids in 2026 roundup covers the whole category, and our Funbox vs Toybox comparison looks at the other big name in this space. 

Frequently Asked Questions

Do both printers only use PLA filament?

Yes. Both the Funbox and the X-MAKER JOY are PLA only machines. PLA is the safest, easiest material for kids, and neither printer has a heated bed, which suits PLA printing well.

Which printer is safer for young children?

Both are fully enclosed and designed for kids. The Funbox adds certified air filtration (UL GREENGUARD, H12 HEPA + activated carbon), anti-scald and anti-pinch protection, and ASTM F963-23 / EN71 toy safety certifications, which makes it the stronger choice when the printer lives in a bedroom.

Can kids design their own models on both printers?

Yes. The Funbox generates printable models from voice, text, doodles, or photos through its AI creative modeling. The X-MAKER JOY offers AI Doodle and AI MiniMe plus 15+ design games and customization modules in the AOSEED App.

Funbox vs Aoseed for a first 3D printer: which is easier?

Both are beginner friendly with one-tap app printing and no manual bed leveling. The Funbox is leveling-free and adds a growth path to desktop slicing, while the X-MAKER JOY keeps the whole experience inside its app.

Conclusion

The Funbox vs Aoseed decision comes down to priorities. The X-MAKER JOY is the budget-friendly pick with a huge ready-made model library. The Funbox costs $30 more and earns it with certified air filtration, faster printing, reliability extras like power-off resume, and a growth path from tap-to-print to real slicing.